Case for A-100 module 9U with three module rows, External dimensions (W x H x D): Approx. 445 x 420 x 160 mm, Internal dimensions (W x H x D): 3 x 84 HP x 3 U, Usable depth for A-100 modules: About 80 mm in the area of...
Empty housing for accepting Eurorack modules Vintage edition, Size: 9 U (3x 3 U), Three rows with 84 HP each for installing modules, Dimensions (W x H x D): approx. 445 x 275 x 160 mm, Usable depth for A-100 modules:...
Low cost base With PSU3 power supply (+ 12V / 2000 mA, -12V / 1200 mA, +5V / 4000 mA, 100 - 230 V), Two module rows, 2x 3 U / 84 HP, Ideal as a base for the A-100LC6 / LC9 or as stand-alone housing, External...
Doepfer A-100LMB PSU3 Monster Base- Low Cost Monster Base made of raw wood- 6 U / 2 rows for modules- width: 168 HP- two built-in A-100PSU3: +12V/4000 mA, -12V/2400mA, +5V/8000mA- usable depth for modules: 65 mm in the...
Doepfer A-100LMS9 PSU3 Low Cost Case- low cost case made of raw wood- 9 U / 3 rows for modules- width: 168 HP- two built-in A-100PSU3: +12V/4000 mA, -12V/2400mA, +5V/8000mA- usable depth for modules: 110 mm (80 mm above...
Mini-Case With external power adapter, Empty case suitable for up to 4 A-100 modules, Usable width 32 HP (e.g. three modules with 8HP and a module with 4HP), External dimensions (W x H x D): approx. 160 x 155 x 125 mm
Mini-Case raw With external power adapter, Empty case, Suited for up to 4 A-100 modules, Usable width 32 HP (e.g. four modules with 8HP), External dimensions (W x H x D): approx. 180 x 155 x 125 mm
Case with base frame Two rows with 84 HP each for installing modules, 2x 3 H3, Dimensions: approx. 465 x 330 x 170 mm, Usable depth for A-100 modules: approx. 70 mm in the power supply area (lower right), otherwise...
Base frame in the case Three rows with 84 HP each for the installation of modules, 3x 3 H3, Usable depth for A-100 modules: approx. 70 mm in the power supply area (lower right), otherwise approx. 100 mm, Dimensions (W...
Substructure housing for modules 2x 84 HP, With PSU3 power supply: +12 V / 2000 mA, -12 V / 1200 mA, +5 V / 4000 mA, 100 - 230 V, Removable lid with carrying handle, Steel ball corners, Max. depth for modules in the...
Power Adapter 12 V / 2000 mA, -12 V / 1200 mA, 5 V / 4000 mA, 100-230 V ATTENTION - the connection and installation of parts which carry mains voltage (mains input, power supply, connecting cable, etc.) must only be...
Combination of power supply and bus board With 8 slots for A-100 modules for max. Total power consumption up to 380 mA, 100-240V AC / 50-60 Hz, IEC power input on the circuit board, Safety protective cover at the...
Vactrol Steiner Filter In contrast to the original circuit, the A-101-1 vactrols are used instead of diodes as variable resistors for frequency control, 2 LEDs provide information on the currently set frequency and...
Vactrol lowpass gate Combination of low-pass filter (LP) and VCA, Based on the idea of the Buchla module 292, The frequency (in LP mode) or the amplitude (in VCA mode) can be controlled manually (F / A) and via 2...
Modular Phaser 12 stage phase shifter, Works with so-called Vactrols as phase-shifting elements, Width: 30TE / 30HP / 152.0 mm, Depth: 65 mm (measured from the rear of the front panel), Power requirements: 50 mA (12 V)...
Six Stage Opto FET VCF New filter module in which so-called opto FETs are used to control the filter frequency, Dimensions (W x D): 40.3 mm (8 HP) x 65 mm, Power requirement: 40 mA
18 dB Low-Pass Filter for A 100 Modular System Voltage-controlled low-pass filter with an 18 dB / octave slope, The circuit is based on a modified transistor ladder (Moog ladder), and corresponds to the low-pass filter...
Quad Resonance Filter Trautonium formant filter, Width: 20 TE / 20 HP / 101.2 mm, Depth: 45 mm (measured from the rear of the front panel), Electricity demand / Current: 30 mA (12 V) / -10 mA (-12 V)
24 dB Low Pass Filter SSM Based on the chip SSM2044, Width: 8 TE / 8 HP / 40.3 mm, Depth: 45 mm (measured from the rear of the front panel), Power Requirements: 30 mA (12 V) / A -20 m (-12 V)
MS20 Low-/ High-Pass Filter MS20 filter clone, Width: 14 HP / 70.8 mm, Depth: 40 mm (measured from the rear side of the front panel), Power requirement: +30 mA (+12 V) / -20 mA (-12 V)
Filter 12 dB Multi-mode filter, in which the circuit of the SEM module is used, Width: 8HP 40.3 mm, Depth: 55 mm (measured from the rear of the front panel), Power requirements: +30 MA (+ 12V) / -20 mA (-12V)
Filter 12 dB Multi-mode filter, in which the circuit of the SEM module is used, Cream-coloured front panel and black knobs, Width: 8HP 40.3 mm, Depth: 55 mm (measured from the rear of the front panel), Power...
Multimode Filter For Doepfer modular systems, Over 15 different filter types, 8 filters are available at the same time, Width: 12 HP / 60.6 mm, Depth: 50 mm (measured from the back of the front panel), Power...
Multi Type Morphing Filters Expansion module for the A100 Modular system, Width: 26TE / 131.8 mm, Depth: 40 mm (measured from the rear of the front panel), Power requirements: 200 mA (12V) / -60 mA (-12V)
Low-Pass Filter 6 / 12 / 24 / 48 dB Module A-108 is a completely new voltage-controlled low pass / band pass filter based on the well-known transistor ladder (Moog ladder). The module has an internal 8-stage low-pass...