Passive Multi-Connector Eight interconnected jacks can be split into 2 groups (solder bridge on the assembly side), Width: 2 HP, Vintage edition with black front plate
Multi-Port Distributor Contains two 6.3mm / 3.5mm multiples, each with a 6.3mm and 2 x 3.5mm jack jacks, One multiple is mono (ie the two small jack sockets are connected to the tip of the 6.3 mm jack socket), The...
DC amplifier module Simple amplifier, Is suitable for control voltages and audio signals via DC coupling, Selectable maximum amplification: 1, 2 or 4 (switchable), Level controls, 2 Peak LEDs, Eurorack format, Width: 4...
Gate / Trigger Combiner Simple, passive module that combines up to 7 gate, trigger or analog signals, Eurorack format, Width: 4 HP, Depth: 20 mm, Power Requirement: + 0mA (+ 12V) / -0mA (-12V)
Multi-Connector (2x 4 multi-port distributors)The A-180 module is a simple, passive multiple distributor. It contains two groups, each with 4 connected sockets, so that you can "multiply" the input or output of a...'
Bus Board Compatible with the Roland AIRA series (requires PSU3 power supply), Bus board (1x), Incl. 4 connection cables with flat connectors, approx. 30 cm in length
Doepfer A-183-9- Eurorack Module- Quad USB Power Supply- 4x USB port for powering external devices- no USB functionality!- requires a rack with +5V power supply (Doepfer A-100PSU3 recommended)- power consumption: 0 mA...
Doepfer A-180-4- Eurorack Module- Quad Buffer- contains 4 separate CV buffer circuits- intended for the outputs of switches, quantizers, sequencers, S&H modules and much more- outputs are normalized to the next input-...
Dual Voltage Inverter Dual voltage inverter, When applied to the input, the voltage is inverted (for example from 5 V to -5 V inversion) and is available at the output, Two LEDs are used for voltage control of the...
External Foot Controller Module Foot controller connector and dual foot switch connector to provide analogue control voltages (foot controller) and two gate / trigger signals (footswitches) to control other A-100...
Bus Access Module (BAC) An active bus access module (BAC) to feed CV and gate into the bus via a jack plug (ex., with several A-100 racks or an external MIDI-CV / gate interface), Alternatively, the module can also be...
Multiple Distribution Module Passive, Each socket can be switched in 3 variants (1,2, off), 8-Way multipin: all switches on the left or right, Two times 4-fold multipin: four on 1, four on 2, Eurorack format, Width: 6...
Модуль A-162 содержит две идентичные схемы, которые генерируют триггерный сигнал с регулируемой задержкой и длиной от входящего сигнала (например, гейт, триггер, прямоугольник LFO).
Slew Limiter Module Voltage controlled, Applied voltage jump at the input leads to a rising or falling curve whose steepness is controlled with the rate knob, Euro rack format, Width: 8 HP, Depth: 40 mm, Power...
Модуль А-116 осуществляет управляемое напряжением динамическое изменение звукового сигнала. Он может создавать новые формы сигналов от стандартных форм VCO и модулировать эти изменения в реальном времени.
Модуль A-118 - это генератор шума и случайного напряжения. Он генерирует три типа сигналов: белый шум, окрашенный шум и случайное напряжение. Шумовой сигнал генерируется путем усиления шума транзистора и является 100% аналоговым.