Quad Precision VCO Perfect for polyphonic or paraphone patches, Four precision VCOs with output mixers and a master control unit, Waveforms: Triangle, sawtooth and rectangle with individual outputs, Minute 10 octave...
Performance Mixer - 4-Way Input Module Control knobs per channel: Gain, output volume, pan and AUX, as well as mute switch and level LED, Several input modules can be cascaded, Width: 16 HP, Depth: 40 mm, Power...
Eurorack Module Dual Envelope Controlled VCA, Envelope type selectable via switch: AD / AR / ADSR, CV input with attenuator to control any envelope parameter (selectable by jumper), Audio input level adjustable, Manual...
Модуль A-138m представляет собой матричный микшер 4 x 4 с переключателями для однополярного / биполярного режима для каждой секции. В неполярном режиме регуляторы работают как аттенюаторы, в биполярном - как поляризаторы.
Vactrol lowpass gate Combination of low-pass filter (LP) and VCA, Based on the idea of the Buchla module 292, The frequency (in LP mode) or the amplitude (in VCA mode) can be controlled manually (F / A) and via 2...
Wasp Filter Special edition, Special 12 dB multimode filter, Circuit technology of the "EDP Wasp", Black front, Yellow pot caps, Width: 8 HP, Depth: 45 mm, Power requirements: +30 mA (+12 V)/-10 mA (-12 V)'
Модуль A-124 представляет собой мультирежимный фильтр с крутизной 12 дБ/окт, собранный по необычной схеме фильтра «EDP Wasp» (аналоговый синтезатор с черным-желтым корпусом, созданный в конце семидесятых, выпускавшийся британской компанией...
Простой, но полезный прибор для микширования и панорамирования 4х сигналов. Микшер работает как с аудио, так и с управляющими сигналами и может использоваться как небольшой матричный микшер,
Модуль A-118 - это генератор шума и случайного напряжения. Он генерирует три типа сигналов: белый шум, окрашенный шум и случайное напряжение. Шумовой сигнал генерируется путем усиления шума транзистора и является 100% аналоговым.
Analogue Modular System - Portable Suitcase Version Basic system with PSU3 power supply (12V / 2000mA, 12V / 1200mA 100 - 230 V), Installed modules and bus boards, Overall dimensions (W x H x D - with lid and rubber...
Doepfer A-100LMB PSU3 Monster Base- Low Cost Monster Base made of raw wood- 6 U / 2 rows for modules- width: 168 HP- two built-in A-100PSU3: +12V/4000 mA, -12V/2400mA, +5V/8000mA- usable depth for modules: 65 mm in the...
Doepfer A-100LMS9 PSU3 Low Cost Case- low cost case made of raw wood- 9 U / 3 rows for modules- width: 168 HP- two built-in A-100PSU3: +12V/4000 mA, -12V/2400mA, +5V/8000mA- usable depth for modules: 110 mm (80 mm above...
Substructure housing for modules 2x 84 HP, With PSU3 power supply: +12 V / 2000 mA, -12 V / 1200 mA, +5 V / 4000 mA, 100 - 230 V, Removable lid with carrying handle, Steel ball corners, Max. depth for modules in the...
Base frame in the case Three rows with 84 HP each for the installation of modules, 3x 3 H3, Usable depth for A-100 modules: approx. 70 mm in the power supply area (lower right), otherwise approx. 100 mm, Dimensions (W...
Case with base frame Two rows with 84 HP each for installing modules, 2x 3 H3, Dimensions: approx. 465 x 330 x 170 mm, Usable depth for A-100 modules: approx. 70 mm in the power supply area (lower right), otherwise...
Empty housing for accepting Eurorack modules Vintage edition, Size: 9 U (3x 3 U), Three rows with 84 HP each for installing modules, Dimensions (W x H x D): approx. 445 x 275 x 160 mm, Usable depth for A-100 modules:...
Low cost base With PSU3 power supply (+ 12V / 2000 mA, -12V / 1200 mA, +5V / 4000 mA, 100 - 230 V), Two module rows, 2x 3 U / 84 HP, Ideal as a base for the A-100LC6 / LC9 or as stand-alone housing, External...
Case for A-100 module 9U with three module rows, External dimensions (W x H x D): Approx. 445 x 420 x 160 mm, Internal dimensions (W x H x D): 3 x 84 HP x 3 U, Usable depth for A-100 modules: About 80 mm in the area of...
Empty Housing for Receiving Eurorack Modules Vintage Edition, Size: 6 RU (2x 3RU), Two rows of 84TE each for the installation of modules, Dimensions (W x H x D): approx. 445 x 275 x 160 mm, Usable depth for A-100...
Original Doepfer case Untreated (no paint and/or lacquer) body constructed from "raw" wood, External dimensions: approx. 445 x 275 x 160 mm, Interior dimensions: approx. 2x 84 HP x 3 U, Usable depth for A-100 modules:...'
Modular Phaser 12 stage phase shifter, Works with so-called Vactrols as phase-shifting elements, Width: 30TE / 30HP / 152.0 mm, Depth: 65 mm (measured from the rear of the front panel), Power requirements: 50 mA (12 V)...
Doepfer A-190-5- Eurorack module- polyphonic Midi/USB-to-CV/Gate-Interface- controls up to 4 voices- separate outputs for pitch-cv, gate and 2 assignable control voltages (for example modulation wheel, velocity,...
Empty housing for Eurorack modules Vintage Edition, Size: 3 RU, A series with 84TE for the installation of modules, Dimensions (W x H x D): approx. 445 x 150 x 160 mm, Colour: Black, Including external power supply...
Tapped BBD Module 6 Outputs (BBD stages 396, 662, 1194, 1726, 2790, 3328), Two mixing units each with dry/ wet knobs, Width: 30 HP, Depth: 70 mm, Power consumption: +120 mA (+12V) / -50 mA (-12V)