Expansion module For the Intellijel designed Quadra (Article Nr 440073 - not included, must be ordered separately), EOC (end of cycle) pulse outputs, Voltage control of attack and decay (with attenuators) of all four...
Interface Module Interface for balanced line-level (+4 dBu), 1x Eurorack signal path to balanced TRS 6.3 mm jack output path, Width: 10 HP, Depth: 27 mm, Power requirement: +9 mA (+12 V) / -9 mA (-12 V)
Intellijel Designs Atlantis – двойной аналоговый полноценный субтрактивный синт войс, вдохновленный архитектурой и звуком классического Roland SH-101, выполненный в виде единого модуля в 40HP.
Intellijel Designs Rubicon2 – аналоговый thru-zero FM осциллятор с огромным количеством гибких настроек, который удовлетворит самое взыскательное воображение.
Intellijel Designs Plonk – еврорэк модуль, специализирующийся на создании как реалистичных, так и неземных перкуссионных звуков с возможностью плавного морфинга между ними.
8-Way pitch and gate sequencer Pitch, pulse count, gate mode, and skip/slide are available per step, Skip / Slide: a single-click activates the TB303-like slide (constant time portamento) with adjustable time- a double...
Analog Compressor Module Completely analog signal path, Sidchain with SVF filter - LP, BP and HP, Edcor transformers in the output stage provide a very good saturation behavior, Three different analog circuits: TUBE...
Wavefolder / Wave Shaper Fold's slider with CV input and attenuator controls the amount of wave convolution, Switch to select 2, 4 or 6 levels of folding, Also suitable for control voltages, Symmetry shifts the signal...
Spring Reverb Module Parametric EQ with frequency, Q-factor and gain controls, Limiter in feedback path prevents overriding of high level feedback, Switch to choose between three different connected tanks (one on the...
Monophonic MIDI to CV interface DIN or USB MIDI input, 2x Clock outputs, one with selectable divisions, Gate and trigger outputs as well as a modulation wheel and CC output for additional modulation, Width: 6 HP,...
Headphone and stereo output module L and R +4 dBv unbalanced line level outputs on TS 1/4″ Neutrik jacks, Switch mono / stereo monitoring, Left input normalled to right input, Individual level attenuators and...
Interface for balanced line-level +4 dBu 2x Balanced TRS 1/4" input and output paths, 4x 6-Stage LED VU meter for simultaneous monitoring of all inputs and outputs, Input path has a gain of up to 20 dB, Output path...'
Dual Multi-mode VCF and Crossfader Two independent filters with six modes each, CV inputs for modulating the cutoff frequency and resonance, Filters can be switched independently, in series or in parallel and...
Multimode VCF and Phaser MULTI output with 27 selectable filter types, LP, BP and HP outputs, Width: 10 TE / HP, Depth: 40 mm, Power requirement: +60 mA (+12 V) / -56 mA (-12 V)
Filter for Modular Systems 2-Pole low pass, 2-pole high pass and 1-pole band pass, FM1 input works as 1V / oct when the knob is completely turned to the right (clean tracking over at least four octaves), Width: 6 TE /...
Quadruple Function and Envelope Generator Three different modes: AD (attack - decay), AHR (attack - hold - release), Cycle (produces an LFO whose frequency and curve depends on Attack and Decay), Width: 12 HP, Depth:...
Extendable Eurorack Format Audio Mixer Inputs 1 and 2 are single-channel mono inputs, each with its own mute switch and level control, Input 3 is a two-channel stereo input with a common mute and level control, Input 4...
Dual Log / Lin VCA Curve infinitely adjustable from linear to exponential, LEDs for monitoring the CV signal, Attenuator for CV, Width: 6 TE / HP, Depth: 35 mm, Power requirement: +36 mA (+12 V) / -35 mA (-12 V)
Voltage Controlled VCA and Mixer Volume control per VCA, CV Attenuator with two-colour LEDs for monitoring bi-polar CV signals, Curve infinitely adjustable from linear to exponential, Each CV input is normalized to the...
6 Channel CV / Audio Mixer 6 Audio / CV inputs, 6 Mute / function inputs, 3 Bus outputs with routing switch per channel, Per channel linear LED sliders, Width: 18 HP, Depth: suitable for Skiff housing, Power...
Triple Active Attenuator Module 3 Modes per channel: active attenuator, bipolar attenuator, inverting attenuator, Width: 6 HP / HP, Depth: suitable for Skiff housing, Power requirement: +16 mA (+12 V) / -14 mA (-12 V)
Twice 1 x 3 Buffered Multiplier Module Output of the first multiple is normalised to the input of the second, Width: 2 HP, Depth: 39 mm, Power requirement: +4 mA (+12 V) / -17 mA (-12 V)
Mixer Module Dual 3: 1/6: 1 Unity Gain Mixer, Dual 3: 1 audio and CV mixer, Output of the upper mixer is normalized to the lower mixer, Input signals are neither amplified nor attenuated, Width: 2 HP, Depth: 29 mm,...
Inverter Module Quad CV inverter, Inverts incoming signals by 180 degrees, Outputs are normalized to the input below, Width: 2 TE / HP, Depth: 29 mm, Power requirement: +4 mA (+12 V) / -17 mA (-12 V)
Passive Logic Module Various logic sources (triggers, gates, etc.) can be merged to form a logical OR combination output, Width: 2 TE / HP, Depth: 18 mm, Power requirement: +0 mA (+12 V) / -0 mA (-12 V)
Logic Module Input Z is normalized to Y and Y is again to X, Bipolar voltage control of the logic types for section a and b with attenuators, Available logic types: AND (and), OR (or), NOR (not-or), XOR (exclusive or),...