Module Combination of four S & H stages, sequential gate and sequencer controller, Voice allocate mode: From monophonic melodies pseudo-polyphonic sequences can be generated, Shift Register Mode: To create chords -...
Multi-Dimensional Performance Touch Controller Responds to the vertical position of the finger and the applied pressure, Can be configured in different modes, The selected mode determines which type of signal (CV,...
Housing for Eurorack modules 20 Slots, Power supply: +12 V / 1500 mA, -12 V / 1500 mA, +5 V / 1000 mA, External dimensions (W x H x D): 177.4 x 81.3 x 435.6 mm, Width inside: 2x 104 TE / HP, Height inside: 1x 3 HE, 1x...
Modular System Case 28 Slots for Eurorack modules, Power supply: +12 V / 3000 mA, -12 V / 3000 mA, +5 V / 1500 mA, External dimensions (W x H x D): 312 x 165 x 546 mm, Internal dimensions: 3x (width) 104 HP, (height)...
Stealth case for housing modules Colour: Stealth Black, Connectors are located on the rear of the case, 2x 6.3 mm Jack input, 2x 6.3 mm Jack output, MIDI input, output and thru connections, USB port, 28 Slots for...
Intellijel Designs Atlantis – двойной аналоговый полноценный субтрактивный синт войс, вдохновленный архитектурой и звуком классического Roland SH-101, выполненный в виде единого модуля в 40HP.
Interface Module Interface for balanced line level (+4 dBu) signals, 4x 2-Stage LED VU meter for simultaneous monitoring of all inputs and outputs, Input path has a gain of up to 20 dB, Output path goes up to a nominal...
Interface for balanced line-level +4 dBu 2x Balanced TRS 1/4" input and output paths, 4x 6-Stage LED VU meter for simultaneous monitoring of all inputs and outputs, Input path has a gain of up to 20 dB, Output path...'
Twice 1 x 3 Buffered Multiplier Module Output of the first multiple is normalised to the input of the second, Width: 2 HP, Depth: 39 mm, Power requirement: +4 mA (+12 V) / -17 mA (-12 V)
Multiple Module Twice 1 x 4 buffered multiplier module, Output of the first multiple is normalized to the input of the second, Width: 14 HP, Depth: 29 mm, Power requirement: +4 mA (+12 V) / -17 mA (-12 V)
Headphone and stereo output for Eurorack systems High-quality headphone output for consumer and studio headphones, Width: 10 HP, Depth: 32 mm, Power requirement: +30 mA (+12 V) / -30 mA (-12 V)
Balanced TRS connectors for the Audio I/O 1U Width: 16 HP, Depth: 38 mm, Power requirement: +0 mA (+12 V) / -0 mA (-12 V) Note: Requires the Audio I/O 1U (Article Nr 440098 ) - not included, must be ordered separately...
Analog Compressor Module Completely analog signal path, Sidchain with SVF filter - LP, BP and HP, Edcor transformers in the output stage provide a very good saturation behavior, Three different analog circuits: TUBE...
Interface Module Interface for balanced line level (+4 dBu), 1x Balanced TRS 6.3 mm jack input path to Eurorack modular signal level, Width: 10 HP, Depth: 27 mm, Power requirement: +9 mA (+12 V) / -9 mA (-12 V)
8-Way pitch and gate sequencer Pitch, pulse count, gate mode, and skip/slide are available per step, Skip / Slide: a single-click activates the TB303-like slide (constant time portamento) with adjustable time- a double...
Extendable Eurorack Format Audio Mixer Inputs 1 and 2 are single-channel mono inputs, each with its own mute switch and level control, Input 3 is a two-channel stereo input with a common mute and level control, Input 4...
Dual Multi-mode VCF and Crossfader Two independent filters with six modes each, CV inputs for modulating the cutoff frequency and resonance, Filters can be switched independently, in series or in parallel and...