Multi-Dimensional Performance Touch Controller Responds to the vertical position of the finger and the applied pressure, Can be configured in different modes, The selected mode determines which type of signal (CV,...
Module Combination of four S & H stages, sequential gate and sequencer controller, Voice allocate mode: From monophonic melodies pseudo-polyphonic sequences can be generated, Shift Register Mode: To create chords -...
Expansion module For the Intellijel designed Quadra (Article Nr 440073 - not included, must be ordered separately), EOC (end of cycle) pulse outputs, Voltage control of attack and decay (with attenuators) of all four...
Interface Module Interface for balanced line-level (+4 dBu), 1x Eurorack signal path to balanced TRS 6.3 mm jack output path, Width: 10 HP, Depth: 27 mm, Power requirement: +9 mA (+12 V) / -9 mA (-12 V)
Intellijel Zeroscope 1U- Eurorack Module- 2-channel Eurorack oscilloscope, frequency meter and tuner- Single, Dual and X-Y Modes- adjustable timebase: 10 us - 10 s- voltage range: 0,5 V - 10 V, Hold mode- designed in...
Filter for Modular Systems 2-Pole low pass, 2-pole high pass and 1-pole band pass, FM1 input works as 1V / oct when the knob is completely turned to the right (clean tracking over at least four octaves), Width: 6 TE /...
Dual Log / Lin VCA Curve infinitely adjustable from linear to exponential, LEDs for monitoring the CV signal, Attenuator for CV, Width: 6 TE / HP, Depth: 35 mm, Power requirement: +36 mA (+12 V) / -35 mA (-12 V)
USB Power Module Allows the supply of USB devices with 1A, Compatible with the TPS30 MAX and TPS80 backplanes, the TPS30MINI board requires an adapter, Width: 4 TE / HP
Mixer Module Dual 3: 1/6: 1 Unity Gain Mixer, Dual 3: 1 audio and CV mixer, Output of the upper mixer is normalized to the lower mixer, Input signals are neither amplified nor attenuated, Width: 2 HP, Depth: 29 mm,...
USB/DIN MIDI interface DIN or USB MIDI input, 2x Clock outputs, one with selectable divisions, Sequencer synchronisation via run and reset outputs, Precision 0-10 V note pitch output with pitch bend & portamento CC...
Monophonic MIDI to CV interface DIN or USB MIDI input, 2x Clock outputs, one with selectable divisions, Gate and trigger outputs as well as a modulation wheel and CC output for additional modulation, Width: 6 HP,...
Headphone and stereo output module L and R +4 dBv unbalanced line level outputs on TS 1/4″ Neutrik jacks, Switch mono / stereo monitoring, Left input normalled to right input, Individual level attenuators and...
Wavefolder / Wave Shaper Fold's slider with CV input and attenuator controls the amount of wave convolution, Switch to select 2, 4 or 6 levels of folding, Also suitable for control voltages, Symmetry shifts the signal...
Triple Active Attenuator Module 3 Modes per channel: active attenuator, bipolar attenuator, inverting attenuator, Width: 6 HP / HP, Depth: suitable for Skiff housing, Power requirement: +16 mA (+12 V) / -14 mA (-12 V)
Spring Reverb Module Parametric EQ with frequency, Q-factor and gain controls, Limiter in feedback path prevents overriding of high level feedback, Switch to choose between three different connected tanks (one on the...
Intellijel Designs Scales- Eurorack Module- 2-channel quantizer and step sequencer- quantizes any CV signals to a user-defined scale- quantization process can be synchronized to incomming trigger signals- two outputs A...
Intellijel Designs Rubicon2 – аналоговый thru-zero FM осциллятор с огромным количеством гибких настроек, который удовлетворит самое взыскательное воображение.
Attenuator Module Four times active attenuator, Suitable for unipolar or bipolar voltages, Each output is normalized to the next output, so submixes can be created, Width: 28 HP, Depth: 25 mm, Power requirement: +24 mA...
Quadruple Function and Envelope Generator Three different modes: AD (attack - decay), AHR (attack - hold - release), Cycle (produces an LFO whose frequency and curve depends on Attack and Decay), Width: 12 HP, Depth:...
Voltage Controlled VCA and Mixer Volume control per VCA, CV Attenuator with two-colour LEDs for monitoring bi-polar CV signals, Curve infinitely adjustable from linear to exponential, Each CV input is normalized to the...
Inverter Module Quad CV inverter, Inverts incoming signals by 180 degrees, Outputs are normalized to the input below, Width: 2 TE / HP, Depth: 29 mm, Power requirement: +4 mA (+12 V) / -17 mA (-12 V)
Multimode VCF and Phaser MULTI output with 27 selectable filter types, LP, BP and HP outputs, Width: 10 TE / HP, Depth: 40 mm, Power requirement: +60 mA (+12 V) / -56 mA (-12 V)
Intellijel Designs Plonk – еврорэк модуль, специализирующийся на создании как реалистичных, так и неземных перкуссионных звуков с возможностью плавного морфинга между ними.
Logic Module Input Z is normalized to Y and Y is again to X, Bipolar voltage control of the logic types for section a and b with attenuators, Available logic types: AND (and), OR (or), NOR (not-or), XOR (exclusive or),...
Eurorack Module Joystick CV controller, Unipolar and bipolar X / Y outputs, 4 Quadrant outputs A-D (0 V - 10 V), 4 Inputs for audio and control signals for use as a vector mixer, quadraphonic pan controller or...
Interface Module 6.3 mm TS jack interface expander, Extension for the Intellijel Designs I/O 1U pedal (Article Nr 440173 - not included, must be ordered as a separate item), Width: 8 HP, Depth: 44 mm, Power...
Passive Logic Module Various logic sources (triggers, gates, etc.) can be merged to form a logical OR combination output, Width: 2 TE / HP, Depth: 18 mm, Power requirement: +0 mA (+12 V) / -0 mA (-12 V)