Quad Precision VCO Perfect for polyphonic or paraphone patches, Four precision VCOs with output mixers and a master control unit, Waveforms: Triangle, sawtooth and rectangle with individual outputs, Minute 10 octave...
S-Trigger Cable With built-in S-trigger electronics, Length: 1.2 m, 3.5 mm Mono mini jack plug to 1/4" mono jack, Converts gate to switched trigger (S-trigger)'
Cable Set For DIY Synthesizer kit, Consisting of two 16-pin and five 10-pin flat-ribbon cables, With matching counterparts to the 2-pin contact strips on the DIY Synth board, Length: Each 50 cm, The other end of each...
Spring reverb module in Eurorack format By way of spiral springs electronically recreates the reverb effect, Spring system with 3 separate springs, Reverb signal can be fed back to the input, Width: 8 HP, Depth: 50 mm,...
Spring reverb module The Doepfer A-199 is a spring reverb module that via the aid of spiral springs electronically reproduces the reverb effect. Spring system with 3 separate springs, Reverb signal can be on the...
Trautonium Controller For connecting with the Doepfer ribbon controller, Produces a control voltage for the pitch of the oscillators, 2 Sub units: Position and pressure, Width: 8 HP, Depth: 40 mm, Power requirement:...
Trautonium Controller Consists of Doepfer A-198 Module and Ribbon Controller, Ribbon Controller: Generates a control voltage for the pitch of the oscillators by touching the position sensor, Further control voltage can...
Dual CV/ Gate to MIDI/ USB Interface Two independent CV/ Gate-to-MIDI/ USB interfaces, Each interface with 4 inputs (Gate, CVN, CVV, CVC), MIDI in/ out, USB, Euro rack format, Width: 10 HP, Depth: 55 mm, Power...
USB to Clock / Start / Stop Interface Synchronization of clock-controlled modules via MIDI and USB, MIDI input, USB input for MIDI via USB, Clock outputs, Wait button / control input, LED indicators for Clock, "1" and...'
Doepfer A-190-5- Eurorack module- polyphonic Midi/USB-to-CV/Gate-Interface- controls up to 4 voices- separate outputs for pitch-cv, gate and 2 assignable control voltages (for example modulation wheel, velocity,...
USB/ MIDI-CV/ Gate Interface Vintage edition with black front plate, Allows the integration of the A-100 module system into a USB or MIDI system, 4 Analogue CVs, Gate signal, Width: 6 HP, Depth: 55 mm, Power...
USB/MIDI-CV/Gate Interface Allows the integration of the A-100 module system into a USB or MIDI system, 4 Analogue CVs, Gate signal, Width: 6 HP, Depth: 55 mm, Power consumption: + 12V: 60mA/ -12V: 10mA
Midi-to-CV/ Gate Interface Output control voltage: 0 - 5V, Portamento time adjustable via glide knob, Width: 6 HP, Depth: 45 mm, Power consumption: +50 mA (+12V)/ -20 mA (-12V)
Tapped BBD Module 6 Outputs (BBD stages 396, 662, 1194, 1726, 2790, 3328), Two mixing units each with dry/ wet knobs, Width: 30 HP, Depth: 70 mm, Power consumption: +120 mA (+12V) / -50 mA (-12V)
Brigade device module Vintage edition, 4096 BBD stages, For the A-100 modular system, Black front panel, Width: 14 TE / HP, Depth: 60 mm, Power requirement: +80mA (+12V) / -60mA (-12V)
Brigade Device Module BBDs are used to delay audio signals before digital delays are able to deactivate the BBD-generated effects. BBDs have some very unique advantages (or disadvantages - depending on the point of...