Vactrol lowpass gate Combination of low-pass filter (LP) and VCA, Based on the idea of the Buchla module 292, The frequency (in LP mode) or the amplitude (in VCA mode) can be controlled manually (F / A) and via 2...
Mini-Case raw With external power adapter, Empty case, Suited for up to 4 A-100 modules, Usable width 32 HP (e.g. four modules with 8HP), External dimensions (W x H x D): approx. 180 x 155 x 125 mm
Quad Exponential VCA / Mixer The module A-132-4 contains four identical voltage-controlled amplifiers (VCA) with exponential normalization. Each VCA has two control voltage inputs (CV1, CV2), a signal input (In), and a...
Euro Rack Module With three functions: Ring modulator, sample & hold/ track & hold, slew limiter, Width: 4 HP, Depth: 40 mm, Power consumption +40 mA (+ 12V)/ -30 mA (-12V)
Envelope Generator Parameters can be set independently, 3-Step switch for selecting the time range, Euro rack format, Width: 8 HP, Depth: 50 mm, Power requirements: +20 mA (+12V) / -20 mA (-12V), Black front panel
Voltage Controlled Clock Multiplier Multiplication factor can be controlled by control voltage or a regulator, Black front panel, Width: 4 HP, Depth: 35 mm, Power requirements: +50 mA (+12 V) / -0 mA (-12 V)
Midi-to-CV/ Gate Interface Output control voltage: 0 - 5V, Portamento time adjustable via glide knob, Width: 6 HP, Depth: 45 mm, Power consumption: +50 mA (+12V)/ -20 mA (-12V)
Six Stage Opto FET VCF New filter module in which so-called opto FETs are used to control the filter frequency, Dimensions (W x D): 40.3 mm (8 HP) x 65 mm, Power requirement: 40 mA
Euro Rack Module Vintage edition with black front plate, With three functions: Ring modulator, sample & hold/ track & hold, slew limiter, Width: 4 HP, Depth 40 mm, Power consumption +40 mA (+ 12V)/ -30 mA (-12V)
Eurorack Module Voltage-controlled 24 dB low-pass filter, Cut-off frequency can be set manually or via control voltages, Two CV inputs, Power requirement: +20 mA (+12 V) / -10 mA (-12 V), Dimensions: 8 TE / 8 HP / 40.3...
24 dB Low Pass 1 (VCF1)Module A-120 is a voltage-controlled 24 dB low-pass filter, which filters out the high frequency components from a sound spectrum while allowing the low frequencies to pass unhindered. The cut-off...
Mini-Case With external power adapter, Empty case suitable for up to 4 A-100 modules, Usable width 32 HP (e.g. three modules with 8HP and a module with 4HP), External dimensions (W x H x D): approx. 160 x 155 x 125 mm
Dual linear/exponential VCA The character of the control scale can be switched to linear or exponential, Can be used to process both audio and control voltages, Black front panel, Width: 8 HP, Depth: 50 mm, Power...
Theremin Module Produces variable control voltage when hand is moved around the antenna, Range approx. 30 cm, Maximum output voltage: 10V, Euro rack format, Power requirements: 60 MA (+12 V) / 20 mA -12 V), Width: 8 HP...
A-137 - это волновой умножитель, управляемый напряжением. Основная идея волнового множителя заключается в умножении входящего сигнала (например, треугольника / пилы / синуса из VCO) в течение одного периода формы волны. Благодаря этому появляются...
Spring reverb module The Doepfer A-199 is a spring reverb module that via the aid of spiral springs electronically reproduces the reverb effect. Spring system with 3 separate springs, Reverb signal can be on the...
MS20 Low-/ High-Pass Filter MS20 filter clone, Width: 14 HP / 70.8 mm, Depth: 40 mm (measured from the rear side of the front panel), Power requirement: +30 mA (+12 V) / -20 mA (-12 V)
Multicore Module Ideal for connecting multiple systems or housings, Up to 14 signals can be transmitted via common network cables (RJ45), Width: 2 x 4 HP, Depth: 25 mm, Power requirement: +0 mA (+12 V) / -0 mA (-12 V),...
Eurorack Module Voltage-controlled high-pass filter, 4 Separate filter outputs with different slopes: -6, -12, -18, -24 (dB / oct.), Resonance voltage controllable, Level control for input signal, Power requirement: 30...