Модуль A-141-2 является преемником устаревшего модуля VCADSR A-141. По сравнению с A-141, было добавлено много улучшений и расширений: общий вход управляющего напряжения для всех временных параметров (A / D / R), переключатель временного диапазона,...
Envelope generator with one parameter Decay is adjustable manually or via external control voltage, Envelope output is displayed with LED control, Eurorack format, Width: 8 HP, Depth: 40 mm, Power requirements: +40 mA...
Eurorack Module Dual Envelope Controlled VCA, Envelope type selectable via switch: AD / AR / ADSR, CV input with attenuator to control any envelope parameter (selectable by jumper), Audio input level adjustable, Manual...
Модуль А-143-4 представляет собой счетверённый генератор низких частот (LFO). Поскольку диапазон частот генератора может быть и звуковым, он может использован в качестве четырёх генераторов VCO.
Low Frequency Oscillator 2 With adjustable waveform, 3 outputs, Frequency range selectable, Eurorack format, Width: 8 HP, Depth: 45 mm, Power requirement: +20 mA (+ 12V) / -20 mA (-12V)
Dual sample and hold module Vintage edition with black front plate, Designed to produce 'staircase' voltages, Consists of two separate sample / hold circuits, Eurorack format, Width: 4 HP, Depth: 30 mm, Power...
Octal Voltage Controlled Switch Eight manual or CV controllable switches, Shared output / input (O / I) and two inputs / outputs (I / O1, I / O2) per switch, Functions of inputs and outputs are interchangeable, Two...
Eurorack Module Voltage Addressed Track & Hold / Switch (Multiplexer) / Digital Outputs, Combined electronic 8-way rotary switch- with 8-fold track & hold module, Input and output indicator via LED, 8 Additional...
Модуль A-154 является дополнением к модулю аналогового секвенсора A-155 и предлагает множество новых функций, которые недоступны в базовом блоке управления A-155.
Sequencer Controller Module Vintage edition with black front plate, Expansion module for A-155 (Article Nr 154958 ), Different operating modes, LED display, 8 or 16 sequencer steps, Controls up to 2x A-155 (2x A-155...
Модуль A-154 является дополнением к модулю аналогового секвенсора A-155 и предлагает множество новых функций, которые недоступны в базовом блоке управления A-155.
Analogue and Trigger Sequencer Vintage edition with black front plate, 2 Switch rows with 8 steps each, Euro rack format, Width: 50 HP, Depth: 40 mm, Power consumption: +80 mA (+12V)/ -20 mA (-12V)
Voltage Controlled Clock Multiplier Multiplication factor can be controlled by control voltage or a regulator, Black front panel, Width: 4 HP, Depth: 35 mm, Power requirements: +50 mA (+12 V) / -0 mA (-12 V)
Модуль A-162 содержит две идентичные схемы, которые генерируют триггерный сигнал с регулируемой задержкой и длиной от входящего сигнала (например, гейт, триггер, прямоугольник LFO).
Модуль А-163 представляет собой звуковой делитель частоты, управляемый напряжением. Частота входного сигнала (предпочтительно прямоугольный VCO) делится на целочисленный коэффициент N (N = 1, 2, 3, 4 ... до 32).
Модуль A-165 (Dual Trigger Modifier) содержит два отдельных триггерных модификатора для использования с логическими уровнями (гейт, тактовые сигналы, триггер).
Dual Slew Limiter Vintage edition with black front plate, Contains two separate slew limiters, A limiter with one control for attack and release (0-10 seconds), A limiter with separate controls for attack and release,...
Slew Limiter Module Voltage controlled, Applied voltage jump at the input leads to a rising or falling curve whose steepness is controlled with the rate knob, Euro rack format, Width: 8 HP, Depth: 40 mm, Power...
Модуль A-171-2 - это ограничитель скорости нарастания и спада напряжения с множеством дополнительных параметров, в отличии от простых ограничителей скорости. Это практически лицензионная копия VCS от Ken Stones, которая, в свою очередь, основана на...
A-172 является модулем, который сравнивает напряжение на четырёх аналоговых входах и выдаёт максимальное и минимальное значение на двух аналоговых выходах
Micro Keyboard Module combination outputs the manually generated 1V / octave control voltage and up to 15 different gate and trigger signals, "Send" module A-173-1 with 18 keys and octave switch, "Receive" module...'
Dual Voltage Inverter Dual voltage inverter, When applied to the input, the voltage is inverted (for example from 5 V to -5 V inversion) and is available at the output, Two LEDs are used for voltage control of the...
Euro Rack Module Provides 3 adjustable DC voltages, Adjustable voltage range: 0 - 5 V or -2.5 to 2.5 V, Euro rack format, Width: 8 HP, Depth: 40 mm, Power consumption: +20 mA (+12V)/ -10 mA (-12V)
External Foot Controller Module Foot controller connector and dual foot switch connector to provide analogue control voltages (foot controller) and two gate / trigger signals (footswitches) to control other A-100...
Theremin Module Produces variable control voltage when hand is moved around the antenna, Range approx. 30 cm, Maximum output voltage: 10V, Euro rack format, Power requirements: 60 MA (+12 V) / 20 mA -12 V), Width: 8 HP...
Multi-Connector (2x 4 multi-port distributors)The A-180 module is a simple, passive multiple distributor. It contains two groups, each with 4 connected sockets, so that you can "multiply" the input or output of a...'
Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups- but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width: 2HP
Passive Multi-Connector Eight interconnected jacks can be split into 2 groups (solder bridge on the assembly side), Width: 2 HP, Vintage edition with black front plate
Doepfer A-180-4- Eurorack Module- Quad Buffer- contains 4 separate CV buffer circuits- intended for the outputs of switches, quantizers, sequencers, S&H modules and much more- outputs are normalized to the next input-...
Multicore Module Ideal for connecting multiple systems or housings, Up to 14 signals can be transmitted via common network cables (RJ45), Width: 2 x 4 HP, Depth: 25 mm, Power requirement: +0 mA (+12 V) / -0 mA (-12 V),...
Multi-Port Distributor Contains two 6.3mm / 3.5mm multiples, each with a 6.3mm and 2 x 3.5mm jack jacks, One multiple is mono (ie the two small jack sockets are connected to the tip of the 6.3 mm jack socket), The...
Multiple Distribution Module Passive, Each socket can be switched in 3 variants (1,2, off), 8-Way multipin: all switches on the left or right, Two times 4-fold multipin: four on 1, four on 2, Eurorack format, Width: 6...
Dual Attenuator Passive attenuator, Level attenuation for voltage controls or audio signals for A-100 modules or modules from other manufacturers without attenuators
DC amplifier module Simple amplifier, Is suitable for control voltages and audio signals via DC coupling, Selectable maximum amplification: 1, 2 or 4 (switchable), Level controls, 2 Peak LEDs, Eurorack format, Width: 4...
Doepfer A-183-9- Eurorack Module- Quad USB Power Supply- 4x USB port for powering external devices- no USB functionality!- requires a rack with +5V power supply (Doepfer A-100PSU3 recommended)- power consumption: 0 mA...
Euro Rack Module With three functions: Ring modulator, sample & hold/ track & hold, slew limiter, Width: 4 HP, Depth: 40 mm, Power consumption +40 mA (+ 12V)/ -30 mA (-12V)
Euro Rack Module Vintage edition with black front plate, With three functions: Ring modulator, sample & hold/ track & hold, slew limiter, Width: 4 HP, Depth 40 mm, Power consumption +40 mA (+ 12V)/ -30 mA (-12V)
Sinus Converter / VC Crossfader Eurorack module, Combines two functions in one module: triangle to sine converter as well as voltage-controlled crossfader, Power requirement: +30 mA (+ 12V) / -30 mA (-12V), Width: 4 HP
Bus Access Module (BAC) An active bus access module (BAC) to feed CV and gate into the bus via a jack plug (ex., with several A-100 racks or an external MIDI-CV / gate interface), Alternatively, the module can also be...
Precision Adder / Buffer 4 CV inputs (1x with controller, 3x without controllers), Width: 6 TE / HP, Depth: 50 mm, Power requirement: +10 mA (+12 V) / -10 mA (-12 V)
Gate / Trigger Combiner Simple, passive module that combines up to 7 gate, trigger or analog signals, Eurorack format, Width: 4 HP, Depth: 20 mm, Power Requirement: + 0mA (+ 12V) / -0mA (-12V)
Bucket Brigade Device Module For BBD circuits with 512 stages, For the A-100 modular system, Width: 14 TE / HP, Depth: 60 mm, Power requirement: +80mA (+12V) / -60mA (-12V)