• Allrounder talent with sharp derby beams and bright flood panels and additional grading laser for room-filling red-green patterns and dots
• Fast assembly and dismantling
• By supplied mounting bracket is also a hanging mounting possible
• Including transport case for the bar, bag for the included tripod, as well as wireless foot switch and IR remote control

Technical data:

• Flood Panels: 12x 9W RGB LEDs
• Derby: a total of 12x 3 W LEDs in red, green and blue
• Laser: green 30 mW / 532 nm, red 100 mW / 650 nm
• Strobe: 4x 2 W LEDs in white and UV
• Control: DMX (3/5/10/28 channels), automatic programs, music control, master / slave, foot switch, IR remote or via display
• DMX input and output: XLR 3 pin
• Power input and output: IEC
• Power supply: 100 - 240 V ~ 50/60 Hz
• Power consumption: 130 W
• Transport height tripod: 1.5 m
• Maximum height: 2.5 m
• Weight: 8.8 kg
• Laser class: 3R

Please note our instructions for laser protection at downloads at the bottom of this page before you add the item to the shopping basket!

Important note: This laser only works with a safety switch (for example emergency stop switch Art.370007). The supplied interlock connector is in the unbridged condition and does not close the contact required for the operation of the laser.

From the legal side, we advise against placing the interlock plug in the bridged state independently and using an emergency switch instead.

Further information can be found in DIN EN 60825-1: 2015.