Expansion module For the Intellijel designed Quadra (Article Nr 440073 - not included, must be ordered separately), EOC (end of cycle) pulse outputs, Voltage control of attack and decay (with attenuators) of all four...
Interface Module Interface for balanced line-level (+4 dBu), 1x Eurorack signal path to balanced TRS 6.3 mm jack output path, Width: 10 HP, Depth: 27 mm, Power requirement: +9 mA (+12 V) / -9 mA (-12 V)
Intellijel Designs Scales- Eurorack Module- 2-channel quantizer and step sequencer- quantizes any CV signals to a user-defined scale- quantization process can be synchronized to incomming trigger signals- two outputs A...
8-Way pitch and gate sequencer Pitch, pulse count, gate mode, and skip/slide are available per step, Skip / Slide: a single-click activates the TB303-like slide (constant time portamento) with adjustable time- a double...
Analog Compressor Module Completely analog signal path, Sidchain with SVF filter - LP, BP and HP, Edcor transformers in the output stage provide a very good saturation behavior, Three different analog circuits: TUBE...
Wavefolder / Wave Shaper Fold's slider with CV input and attenuator controls the amount of wave convolution, Switch to select 2, 4 or 6 levels of folding, Also suitable for control voltages, Symmetry shifts the signal...
Spring Reverb Module Parametric EQ with frequency, Q-factor and gain controls, Limiter in feedback path prevents overriding of high level feedback, Switch to choose between three different connected tanks (one on the...
Headphone and stereo output module L and R +4 dBv unbalanced line level outputs on TS 1/4″ Neutrik jacks, Switch mono / stereo monitoring, Left input normalled to right input, Individual level attenuators and...
Interface for balanced line-level +4 dBu 2x Balanced TRS 1/4" input and output paths, 4x 6-Stage LED VU meter for simultaneous monitoring of all inputs and outputs, Input path has a gain of up to 20 dB, Output path...'
Multimode VCF and Phaser MULTI output with 27 selectable filter types, LP, BP and HP outputs, Width: 10 TE / HP, Depth: 40 mm, Power requirement: +60 mA (+12 V) / -56 mA (-12 V)
Filter for Modular Systems 2-Pole low pass, 2-pole high pass and 1-pole band pass, FM1 input works as 1V / oct when the knob is completely turned to the right (clean tracking over at least four octaves), Width: 6 TE /...
Quadruple Function and Envelope Generator Three different modes: AD (attack - decay), AHR (attack - hold - release), Cycle (produces an LFO whose frequency and curve depends on Attack and Decay), Width: 12 HP, Depth:...
6 Channel CV / Audio Mixer 6 Audio / CV inputs, 6 Mute / function inputs, 3 Bus outputs with routing switch per channel, Per channel linear LED sliders, Width: 18 HP, Depth: suitable for Skiff housing, Power...
Triple Active Attenuator Module 3 Modes per channel: active attenuator, bipolar attenuator, inverting attenuator, Width: 6 HP / HP, Depth: suitable for Skiff housing, Power requirement: +16 mA (+12 V) / -14 mA (-12 V)
Inverter Module Quad CV inverter, Inverts incoming signals by 180 degrees, Outputs are normalized to the input below, Width: 2 TE / HP, Depth: 29 mm, Power requirement: +4 mA (+12 V) / -17 mA (-12 V)
Passive Logic Module Various logic sources (triggers, gates, etc.) can be merged to form a logical OR combination output, Width: 2 TE / HP, Depth: 18 mm, Power requirement: +0 mA (+12 V) / -0 mA (-12 V)
Logic Module Input Z is normalized to Y and Y is again to X, Bipolar voltage control of the logic types for section a and b with attenuators, Available logic types: AND (and), OR (or), NOR (not-or), XOR (exclusive or),...